Legal Notice and Disclaimer

Your use of the information provided on this site constitutes your understanding and acceptance of the following conditions:

The information provided on this site is for convenience only and is compiled from public records and data. In the preparation of this site, extensive efforts have been made to offer the most current, correct, and clearly expressed information possible. However, inadvertent errors can occur, and information placed on these Web pages is not intended to replace any official source. Contact the appropriate official information sources for verification of the information provided on these pages.

Use of any of this information is at the user’s own risk. Neither Vanderburgh County, the City of Evansville, nor the Water and Sewer Utility, nor any of their employees, agents, or mapping contractors assume any legal responsibility for the information contained herein, which is provided “as is” with no warranties of any kind. Vanderburgh County, the City of Evansville, or the Water and Sewer Utility disclaims all liability of any kind arising out of the use of, or misuse of, this information and disclaims all express or implied warranties, including warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Neither Vanderburgh County, the City of Evansville, nor the Water and Sewer Utility, nor any of their employees, agents, or mapping contractors will be liable for any actions, claims, damages or judgments of any nature whatsoever arising out of the use or misuse of the information contained in these Web pages.

NOTE: The current Flood Insurance Rate Map (FIRM) panels are based on National Vertical Datum of 1929 (NGVD 29). The GPS elevations given on this site are based on North American Vertical Datum of 1988 (NAVD 88). To convert between NGVD 29 and NAVD 88 Corpscon may be used.
Corpscon, Version 6.0, is a MS-Windows-based program which allows the user to convert coordinates between Geographic, State Plane, Universal Transverse Mercator (UTM) and US National Grid systems on the North American Datum of 1927 (NAD 27), the North American Datum of 1983 (NAD 83) and High Accuracy Reference Networks (HARNs). Corpscon uses the National Geodetic Survey (NGS) program Nadcon to convert between NAD 27, NAD 83 and HARNs. Corpscon, Version 6.0, performs vertical conversions to and from the National Geodetic Vertical Datum of 1929 (NGVD 29) and the North American Vertical Datum of 1988 (NAVD 88). Vertical conversions are based on the NGS program Vertcon and can be performed for the continental U.S. only. Corpscon, Version 6.0, will also calculate geoid-ellipsoid separations based on the NGS program GeoidXX (XX = 90, 93, 96, 99, and 03). Geoid-ellipsoid separations can be calculated for the Continental U.S., Alaska, Hawaii and Puerto Rico/U.S. Virgin Islands.

Corpscon may be downloaded at no cost: http://crunch.tec.army.mil/software/corpscon/corpscon.html

I accept the above-mentioned conditions and limitations of the information provided on this site.